Date   

Re: Need to move basket back to 8

Eric Smith
 

Probably should also move 4 out of the long and muddy position. 

Eric Smith 

On Jan 27, 2013, at 9:41 AM, Greg Johnson <discgolfgreg@...> wrote:

 

I think we still have 2 on 9. It might be good to leave 2 on 12 for those that like to avoid the long muddy trudge to 18 long

Greg J


Need to move basket back to 8

Greg Johnson
 

I think we still have 2 on 9. It might be good to leave 2 on 12 for those that like to avoid the long muddy trudge to 18 long

Greg J


Re: Adair tool shed

 

Nathan wrote...
Awesome Idea!
NATE:
Do you think you'll have a chance to run the idea past the Park's
director, test the waters, see if he's completely opposed or if he
seems warm to the idea? It would be great to know how receptive he
might be before the February meeting, which is a week from this coming
Monday. One possibility for location would be between 3 and 4, near
where the wheelbarrows are currently locked up, or below #4 tee, near
the path. If he didn't want it "off the beaten path," then I suppose
it could go in the far corner, behind the baseball diamond, across the
road where some other storage containers and stuff is, although that
might make it a little more likely to get attacked by nefarious no-gooders.

If we know Park's take on the idea, then that will make the discussion
at the next meeting more or less useful, as it were.

Everett

======================================================================
Everett Kaser Software Logic & Puzzle Games for computers
PO Box 403
Albany OR 97321-0117 Phone: 541-928-5259 8am-8pm PACIFIC TIME
USA http://www.kaser.com
======================================================================

On Wed, Jan 23, 2013 at 12:06 PM, Everett Kaser <everett@kaser.com> wrote:
In thinking about work that needs to be done at Adair (there's ALWAYS
work that needs done), it occurred to me that it would be REALLY nice
to have a small (8x8 to 10x12) shed at Adair, somewhere "out of the way"
of sight from normal park users, where we could store tools. With such
a shed, we could have more than a couple of wheelbarrows locked up
out there, we could then perhaps have:
lawn/brush mower (small "walk behind" mower)
shovels
rakes
wheelbarrows
weed-eater
chainsaw?
riding mower?
We could potentially even use it for storing old "temp tee pads" and
pins, "course closed" signs, etc.

I'm not saying the club would need or want to acquire all of that
stuff at once (the shed would probably cost us between $750 and $1250
to build, VERY rough guess). But once we had the storage, then over
time we could start building an inventory of tools that would make
it EVER so much more convenient and easier for those who actually
do the work out there to DO the work (and not be wearing out and losing
their private tools...) I'm not sure about Benton County, but in Linn
County, any building less than 120 (or 150?) sq ft and not more than
something like 10-12 feet tall doesn't need a building permit.
Obviously, it would have to be solidly built and secured, to
discourage vandals and burglars.

It would, of course, require permission from Parks (as well as agreement
on its position and appearance), but that's something to worry about
after club discussion and agreement on the merits of said proposal.

Comments?

Everett

======================================================================
Everett Kaser Software Logic & Puzzle Games for computers
PO Box 403
Albany OR 97321-0117 Phone: 541-928-5259 8am-8pm PACIFIC TIME
USA http://www.kaser.com
======================================================================


Re: Mikes lame bbq

Eric Smith
 

And the next time you come to a Squirrel's jam, bring your ax. 

Eric 

On Jan 23, 2013, at 1:35 PM, Bill Gaskill <billgaskill@...> wrote:

 

Can that which does not exist but in theory be "lame"

Consider the humble Higg's Bozon...

Something we're as likely to see as this elusive barbeque, and probably theorized about for a shorter period of time!

billy

PS: I found a little clip board in the back of my car this am.  Oops!  Who can take it to festy for me?

On Jan 23, 2013 1:10 PM, "Christiansen, Kelly" <Kelly.Christiansen@...> wrote:
 

Good point.

 

From: wdgc@... [mailto:wdgc@...] On Behalf Of mike gibson
Sent: Wednesday, January 23, 2013 1:08 PM
To: wdgc@...
Subject: [wdgc] Kelly's lame comment

 

 

Yes, hypothetically they all do.

--- On Wed, 1/23/13, Christiansen, Kelly <Kelly.Christiansen@...> wrote:


From: Christiansen, Kelly <Kelly.Christiansen@...>
Subject: RE: [wdgc] Willamette Open Date
To: "wdgc@..." <wdgc@...>
Date: Wednesday, January 23, 2013, 12:27 PM

 

That date conflicts with the doubles barbeque.

 

From: wdgc@... [mailto:wdgc@...] On Behalf Of Nathan Sexton
Sent: Wednesday, January 23, 2013 11:15 AM
To: wdgc@...
Subject: [wdgc] Willamette Open Date

 

 

Our OR state coordinator Jeff Haggerty needs a date for the WOXV ASAP!! I should not be involved in picking this date as I have my wedding likely only 2 or 3 weeks after the open and wont be able to be involved in the TD work. Pick a TD, pick a date, GO GO GO!


Re: Mikes lame bbq

Greg Johnson
 

I'll be out at Adair Friday afternoon or just give it the clipboard to someoone you see that is playing.  Greg


--- On Wed, 1/23/13, Bill Gaskill wrote:

From: Bill Gaskill <billgaskill@...>
Subject: RE: [wdgc] Mikes lame bbq
To: wdgc@...
Date: Wednesday, January 23, 2013, 1:35 PM

 

Can that which does not exist but in theory be "lame"

Consider the humble Higg's Bozon...

Something we're as likely to see as this elusive barbeque, and probably theorized about for a shorter period of time!

billy

PS: I found a little clip board in the back of my car this am.  Oops!  Who can take it to festy for me?

On Jan 23, 2013 1:10 PM, "Christiansen, Kelly" <Kelly.Christiansen@...> wrote:
 

Good point.

 

From: wdgc@... [mailto:wdgc@...] On Behalf Of mike gibson
Sent: Wednesday, January 23, 2013 1:08 PM
To: wdgc@...
Subject: [wdgc] Kelly's lame comment

 

 

Yes, hypothetically they all do.

--- On Wed, 1/23/13, Christiansen, Kelly <Kelly.Christiansen@...> wrote:


From: Christiansen, Kelly <Kelly.Christiansen@...>
Subject: RE: [wdgc] Willamette Open Date
To: "wdgc@..." <wdgc@...>
Date: Wednesday, January 23, 2013, 12:27 PM

 

That date conflicts with the doubles barbeque.
 
From: wdgc@... [mailto:wdgc@...] On Behalf Of Nathan Sexton
Sent: Wednesday, January 23, 2013 11:15 AM
To: wdgc@...
Subject: [wdgc] Willamette Open Date
 
 
Our OR state coordinator Jeff Haggerty needs a date for the WOXV ASAP!! I should not be involved in picking this date as I have my wedding likely only 2 or 3 weeks after the open and wont be able to be involved in the TD work. Pick a TD, pick a date, GO GO GO!


Re: Adair tool shed

Greg Johnson
 

I agree, lets see what Parks thinks.  I doubt they have space or would allow us general access to the existing storage spaces.  GJ


--- On Wed, 1/23/13, Nathan Sexton wrote:

From: Nathan Sexton
Subject: Re: [wdgc] Adair tool shed
To: wdgc@...
Date: Wednesday, January 23, 2013, 12:55 PM

 
Awesome Idea!

On Wed, Jan 23, 2013 at 12:06 PM, Everett Kaser <everett@...> wrote:
In thinking about work that needs to be done at Adair (there's ALWAYS
work that needs done), it occurred to me that it would be REALLY nice
to have a small (8x8 to 10x12) shed at Adair, somewhere "out of the way"
of sight from normal park users, where we could store tools.  With such
a shed, we could have more than a couple of wheelbarrows locked up
out there, we could then perhaps have:
  lawn/brush mower (small "walk behind" mower)
  shovels
  rakes
  wheelbarrows
  weed-eater
  chainsaw?
  riding mower?
We could potentially even use it for storing old "temp tee pads" and
pins, "course closed" signs, etc.

I'm not saying the club would need or want to acquire all of that
stuff at once (the shed would probably cost us between $750 and $1250
to build, VERY rough guess).  But once we had the storage, then over
time we could start building an inventory of tools that would make
it EVER so much more convenient and easier for those who actually
do the work out there to DO the work (and not be wearing out and losing
their private tools...)  I'm not sure about Benton County, but in Linn
County, any building less than 120 (or 150?) sq ft and not more than
something like 10-12 feet tall doesn't need a building permit.
Obviously, it would have to be solidly built and secured, to
discourage vandals and burglars.

It would, of course, require permission from Parks (as well as agreement
on its position and appearance), but that's something to worry about
after club discussion and agreement on the merits of said proposal.

Comments?

Everett

======================================================================
Everett Kaser Software  Logic & Puzzle Games for computers
PO Box 403
Albany OR 97321-0117    Phone: 541-928-5259 8am-8pm PACIFIC TIME
USA                     http://www.kaser.com
======================================================================



------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/wdgc/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/wdgc/join
    (Yahoo! ID required)

<*> To change settings via email:
    wdgc-digest@...
    wdgc-fullfeatured@...

<*> To unsubscribe from this group, send an email to:
    wdgc-unsubscribe@...

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/



Re: Mikes lame bbq

Bill Gaskill
 

Can that which does not exist but in theory be "lame"

Consider the humble Higg's Bozon...

Something we're as likely to see as this elusive barbeque, and probably theorized about for a shorter period of time!

billy

PS: I found a little clip board in the back of my car this am.  Oops!  Who can take it to festy for me?

On Jan 23, 2013 1:10 PM, "Christiansen, Kelly" <Kelly.Christiansen@...> wrote:
 

Good point.

 

From: wdgc@... [mailto:wdgc@...] On Behalf Of mike gibson
Sent: Wednesday, January 23, 2013 1:08 PM
To: wdgc@...
Subject: [wdgc] Kelly's lame comment

 

 

Yes, hypothetically they all do.

--- On Wed, 1/23/13, Christiansen, Kelly <Kelly.Christiansen@...> wrote:


From: Christiansen, Kelly <Kelly.Christiansen@...>
Subject: RE: [wdgc] Willamette Open Date
To: "wdgc@..." <wdgc@...>
Date: Wednesday, January 23, 2013, 12:27 PM

 

That date conflicts with the doubles barbeque.

 

From: wdgc@... [mailto:wdgc@...] On Behalf Of Nathan Sexton
Sent: Wednesday, January 23, 2013 11:15 AM
To: wdgc@...
Subject: [wdgc] Willamette Open Date

 

 

Our OR state coordinator Jeff Haggerty needs a date for the WOXV ASAP!! I should not be involved in picking this date as I have my wedding likely only 2 or 3 weeks after the open and wont be able to be involved in the TD work. Pick a TD, pick a date, GO GO GO!


Re: Mikes lame bbq

Kelly Christiansen
 

Good point.

 

From: wdgc@... [mailto:wdgc@...] On Behalf Of mike gibson
Sent: Wednesday, January 23, 2013 1:08 PM
To: wdgc@...
Subject: [wdgc] Kelly's lame comment

 

 

Yes, hypothetically they all do.

--- On Wed, 1/23/13, Christiansen, Kelly <Kelly.Christiansen@...> wrote:


From: Christiansen, Kelly <Kelly.Christiansen@...>
Subject: RE: [wdgc] Willamette Open Date
To: "wdgc@..." <wdgc@...>
Date: Wednesday, January 23, 2013, 12:27 PM

 

That date conflicts with the doubles barbeque.

 

From: wdgc@... [mailto:wdgc@...] On Behalf Of Nathan Sexton
Sent: Wednesday, January 23, 2013 11:15 AM
To: wdgc@...
Subject: [wdgc] Willamette Open Date

 

 

Our OR state coordinator Jeff Haggerty needs a date for the WOXV ASAP!! I should not be involved in picking this date as I have my wedding likely only 2 or 3 weeks after the open and wont be able to be involved in the TD work. Pick a TD, pick a date, GO GO GO!


Kelly's lame comment

Mike Gibson
 

Yes, hypothetically they all do.


--- On Wed, 1/23/13, Christiansen, Kelly wrote:

From: Christiansen, Kelly
Subject: RE: [wdgc] Willamette Open Date
To: "wdgc@..." Date: Wednesday, January 23, 2013, 12:27 PM

 

That date conflicts with the doubles barbeque.

 

From: wdgc@... [mailto:wdgc@...] On Behalf Of Nathan Sexton
Sent: Wednesday, January 23, 2013 11:15 AM
To: wdgc@...
Subject: [wdgc] Willamette Open Date

 

 

Our OR state coordinator Jeff Haggerty needs a date for the WOXV ASAP!! I should not be involved in picking this date as I have my wedding likely only 2 or 3 weeks after the open and wont be able to be involved in the TD work. Pick a TD, pick a date, GO GO GO!


Re: Adair tool shed

Nathan Sexton
 

Awesome Idea!


On Wed, Jan 23, 2013 at 12:06 PM, Everett Kaser <everett@...> wrote:
In thinking about work that needs to be done at Adair (there's ALWAYS
work that needs done), it occurred to me that it would be REALLY nice
to have a small (8x8 to 10x12) shed at Adair, somewhere "out of the way"
of sight from normal park users, where we could store tools.  With such
a shed, we could have more than a couple of wheelbarrows locked up
out there, we could then perhaps have:
  lawn/brush mower (small "walk behind" mower)
  shovels
  rakes
  wheelbarrows
  weed-eater
  chainsaw?
  riding mower?
We could potentially even use it for storing old "temp tee pads" and
pins, "course closed" signs, etc.

I'm not saying the club would need or want to acquire all of that
stuff at once (the shed would probably cost us between $750 and $1250
to build, VERY rough guess).  But once we had the storage, then over
time we could start building an inventory of tools that would make
it EVER so much more convenient and easier for those who actually
do the work out there to DO the work (and not be wearing out and losing
their private tools...)  I'm not sure about Benton County, but in Linn
County, any building less than 120 (or 150?) sq ft and not more than
something like 10-12 feet tall doesn't need a building permit.
Obviously, it would have to be solidly built and secured, to
discourage vandals and burglars.

It would, of course, require permission from Parks (as well as agreement
on its position and appearance), but that's something to worry about
after club discussion and agreement on the merits of said proposal.

Comments?

Everett

======================================================================
Everett Kaser Software  Logic & Puzzle Games for computers
PO Box 403
Albany OR 97321-0117    Phone: 541-928-5259 8am-8pm PACIFIC TIME
USA                     http://www.kaser.com
======================================================================



------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/wdgc/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/wdgc/join
    (Yahoo! ID required)

<*> To change settings via email:
    wdgc-digest@...
    wdgc-fullfeatured@...

<*> To unsubscribe from this group, send an email to:
    wdgc-unsubscribe@...

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/



Re: Willamette Open Date

Kelly Christiansen
 

That date conflicts with the doubles barbeque.

 

From: wdgc@... [mailto:wdgc@...] On Behalf Of Nathan Sexton
Sent: Wednesday, January 23, 2013 11:15 AM
To: wdgc@...
Subject: [wdgc] Willamette Open Date

 

 

Our OR state coordinator Jeff Haggerty needs a date for the WOXV ASAP!! I should not be involved in picking this date as I have my wedding likely only 2 or 3 weeks after the open and wont be able to be involved in the TD work. Pick a TD, pick a date, GO GO GO!


Adair tool shed

 

In thinking about work that needs to be done at Adair (there's ALWAYS
work that needs done), it occurred to me that it would be REALLY nice
to have a small (8x8 to 10x12) shed at Adair, somewhere "out of the way"
of sight from normal park users, where we could store tools. With such
a shed, we could have more than a couple of wheelbarrows locked up
out there, we could then perhaps have:
lawn/brush mower (small "walk behind" mower)
shovels
rakes
wheelbarrows
weed-eater
chainsaw?
riding mower?
We could potentially even use it for storing old "temp tee pads" and
pins, "course closed" signs, etc.

I'm not saying the club would need or want to acquire all of that
stuff at once (the shed would probably cost us between $750 and $1250
to build, VERY rough guess). But once we had the storage, then over
time we could start building an inventory of tools that would make
it EVER so much more convenient and easier for those who actually
do the work out there to DO the work (and not be wearing out and losing
their private tools...) I'm not sure about Benton County, but in Linn
County, any building less than 120 (or 150?) sq ft and not more than
something like 10-12 feet tall doesn't need a building permit.
Obviously, it would have to be solidly built and secured, to
discourage vandals and burglars.

It would, of course, require permission from Parks (as well as agreement
on its position and appearance), but that's something to worry about
after club discussion and agreement on the merits of said proposal.

Comments?

Everett

======================================================================
Everett Kaser Software Logic & Puzzle Games for computers
PO Box 403
Albany OR 97321-0117 Phone: 541-928-5259 8am-8pm PACIFIC TIME
USA http://www.kaser.com
======================================================================


Willamette Open Date

Nathan Sexton
 

Our OR state coordinator Jeff Haggerty needs a date for the WOXV ASAP!! I should not be involved in picking this date as I have my wedding likely only 2 or 3 weeks after the open and wont be able to be involved in the TD work. Pick a TD, pick a date, GO GO GO!


Re: WDGC clipboards for Festivus

Greg Johnson
 

Yes Dion, please bring your basket and the clipboards you have.  I will buy a few more to replace the ones that have bit the dust.  David has his clipboards to but probably won't be there in the morning.  His shoulder decided against playing.
 
Bummer looks like rain is returning for Festivus.
Greg

--- On Tue, 1/22/13, dionarlyn@... wrote:

From: dionarlyn@...
Subject: Re: [wdgc] WDGC clipboards for Festivus
To: "John Ross"
Date: Tuesday, January 22, 2013, 8:54 PM

 
I may have a few random club clipboards. And some extra of my own I can supply the morning of. Greg, do you still need my basket?

Sent from my HTC on the Now Network from Sprint!

----- Reply message -----
From: "John Ross" Date: Tue, Jan 22, 2013 7:31 am
Subject: [wdgc] WDGC clipboards for Festivus
To: "wdgc@..."

 
The important thing is to find Nate, it looks like. He could be in one of the boxes WITH the missing clipboards.

Or possibly run off with Brianna who's always running somewhere.

Let me know if I can be more helpful.

JohnR



From: Everett Kaser
To: Greg Johnson
Sent: Tuesday, January 22, 2013 6:58 AM
Subject: Re: [wdgc] WDGC clipboards for Festivus

Greg wrote...
> Does anyone know who has the rest of the clipboards?  I only got
> 16 back from Everett.  I checked with David and he does not.  I
> know there have been a couple of casualties.

Are you sure?  The best of my memory is:
I got some clipboards from you along with the other stuff.
Nate brought a box with some clipboards.
At the end of the President's Cup, I think there were still some
clipboards in YOUR box, plus some clipboards went back into Nate's
box, and Nate's box was set inside your box.  Have you taken those
two boxes 'apart'?  Or is Nate's box still nestled inside your box,
and maybe some clipboards are hidden underneath it?

I've checked here and there's nothing left here, and I don't remember
anyone else (Dave, Nate, etc) taking any of the equipment at the end
of the P.C.

Everett

======================================================================
Everett Kaser Software  Logic & Puzzle Games for computers
PO Box 403
Albany OR 97321-0117    Phone: 541-928-5259 8am-8pm PACIFIC TIME
USA                    http://www.kaser.com
======================================================================



------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/wdgc/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/wdgc/join
    (Yahoo! ID required)

<*> To change settings via email:
    wdgc-digest@...
    wdgc-fullfeatured@...

<*> To unsubscribe from this group, send an email to:
    wdgc-unsubscribe@...

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/




Re: WDGC clipboards for Festivus

Dion Arlyn
 


Re: WDGC clipboards for Festivus

Greg Johnson
 

Thanks, just the 16 in those nestled boxes. Went thru all stuff I had stored at townhouse. I will check around again at home tonight. Casey please bring your 6 Sat morning as backup. I may only work in the office Tuesday. Taking at least Friday afternoon off. Got the temp pads set up Sunday am with help from KC.

There are still about 15 spots open. Anyone who was on the fence still has a chance to get in. Let me know what division you plan to play and I'll take payment on Saturday if I don't see you at Adair to pay on Friday.

Greg J

On Jan 22, 2013, at 6:58 AM, Everett Kaser <everett@kaser.com> wrote:

Greg wrote...
Does anyone know who has the rest of the clipboards? I only got
16 back from Everett. I checked with David and he does not. I
know there have been a couple of casualties.
Are you sure? The best of my memory is:
I got some clipboards from you along with the other stuff.
Nate brought a box with some clipboards.
At the end of the President's Cup, I think there were still some
clipboards in YOUR box, plus some clipboards went back into Nate's
box, and Nate's box was set inside your box. Have you taken those
two boxes 'apart'? Or is Nate's box still nestled inside your box,
and maybe some clipboards are hidden underneath it?

I've checked here and there's nothing left here, and I don't remember
anyone else (Dave, Nate, etc) taking any of the equipment at the end
of the P.C.

Everett

======================================================================
Everett Kaser Software Logic & Puzzle Games for computers
PO Box 403
Albany OR 97321-0117 Phone: 541-928-5259 8am-8pm PACIFIC TIME
USA http://www.kaser.com
======================================================================



------------------------------------

Yahoo! Groups Links



Re: WDGC clipboards for Festivus

John Ross <rossjohn414@...>
 

The important thing is to find Nate, it looks like. He could be in one of the boxes WITH the missing clipboards.

Or possibly run off with Brianna who's always running somewhere.

Let me know if I can be more helpful.

JohnR



From: Everett Kaser
To: Greg Johnson
Sent: Tuesday, January 22, 2013 6:58 AM
Subject: Re: [wdgc] WDGC clipboards for Festivus

Greg wrote...
> Does anyone know who has the rest of the clipboards?  I only got
> 16 back from Everett.  I checked with David and he does not.  I
> know there have been a couple of casualties.

Are you sure?  The best of my memory is:
I got some clipboards from you along with the other stuff.
Nate brought a box with some clipboards.
At the end of the President's Cup, I think there were still some
clipboards in YOUR box, plus some clipboards went back into Nate's
box, and Nate's box was set inside your box.  Have you taken those
two boxes 'apart'?  Or is Nate's box still nestled inside your box,
and maybe some clipboards are hidden underneath it?

I've checked here and there's nothing left here, and I don't remember
anyone else (Dave, Nate, etc) taking any of the equipment at the end
of the P.C.

Everett

======================================================================
Everett Kaser Software  Logic & Puzzle Games for computers
PO Box 403
Albany OR 97321-0117    Phone: 541-928-5259 8am-8pm PACIFIC TIME
USA                    http://www.kaser.com
======================================================================



------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/wdgc/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/wdgc/join
    (Yahoo! ID required)

<*> To change settings via email:
    wdgc-digest@...
    wdgc-fullfeatured@...

<*> To unsubscribe from this group, send an email to:
    wdgc-unsubscribe@...

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/




Re: WDGC clipboards for Festivus

Nathan Sexton
 

I dont think I have any more but I will double check.


On Mon, Jan 21, 2013 at 11:19 PM, Greg Johnson <discgolfgreg@...> wrote:
 

Does anyone know who has the rest of the clipboards? I only got 16 back from Everett. I checked with David and he does not. I know there have been a couple of casualties.

Greg J



Re: WDGC clipboards for Festivus

 

Greg wrote...
Does anyone know who has the rest of the clipboards? I only got
16 back from Everett. I checked with David and he does not. I
know there have been a couple of casualties.
Are you sure? The best of my memory is:
I got some clipboards from you along with the other stuff.
Nate brought a box with some clipboards.
At the end of the President's Cup, I think there were still some
clipboards in YOUR box, plus some clipboards went back into Nate's
box, and Nate's box was set inside your box. Have you taken those
two boxes 'apart'? Or is Nate's box still nestled inside your box,
and maybe some clipboards are hidden underneath it?

I've checked here and there's nothing left here, and I don't remember
anyone else (Dave, Nate, etc) taking any of the equipment at the end
of the P.C.

Everett

======================================================================
Everett Kaser Software Logic & Puzzle Games for computers
PO Box 403
Albany OR 97321-0117 Phone: 541-928-5259 8am-8pm PACIFIC TIME
USA http://www.kaser.com
======================================================================


Re: WDGC clipboards for Festivus

Casey Lohrman <cglohrman@...>
 

Don't know where those are, but I've got 6 of my own that the club is welcome to.  If you need them let me know and I'll drop them by your desk.

Casey


From: Greg Johnson
To: "wdgc@..." <wdgc@...>
Sent: Monday, January 21, 2013 11:19 PM
Subject: [wdgc] WDGC clipboards for Festivus

 
Does anyone know who has the rest of the clipboards? I only got 16 back from Everett. I checked with David and he does not. I know there have been a couple of casualties.

Greg J


1501 - 1520 of 2254